Cryogenic Wire


Cryogenic Wire Features

Used to minimize heat leak into the sensor and cryogenic system, cryogenic wire has a much lower thermal conductivity (and higher electrical resistivity) than copper wire. The most common type of cryogenic wire is phosphor bronze. This wire is available in one-, two-, and four-lead configurations. Four-lead configurations are available as Quad-twist™ (two twisted pairs) or Quad-lead™ (ribbon). Wire gauge is 32 or 36 AWG, with polyimide or polyvinyl formal (Formvar®) used to insulate the wires. Other common cryogenic wires include manganin, nichrome heater wire, and HD-30 heavy duty copper wire.

Single strand cryogenic wire — WSL-32, WSL-36

  • Phosphor bronze wire
  • Non-ferromagnetic
  • Single strand
  • 32 and 36 AWG
  • Polyimide insulation (WSL-32)
  • Formvar® insulation, clear (WSL-36)

single strand wireLake Shore non-magnetic (NM) single lead (SL) wire is a phosphor bronze (CuSnP alloy) wire. This wire has a relatively low temperature dependence of its resistance from room temperature to helium temperatures.

WSL-32 can be used for sensor installations requiring stronger and more ‘rugged’ leads.

WSL-36 wire is recommended for general sensor installation.

ORDER SINGLE STRAND WIRE NOW

Want to add wire to your sensor? See the lead extension page for more info.

Twisted lead wire — WCT-34

  • Silver-plated copper
  • 34 AWG
  • Teflon® insulation

twisted wireThese low resistance twisted pair wires are ideal for extending the lead length of Lake Shore cryogenic Hall sensors.

ORDER TWISTED WIRE NOW

Want to add wire to your sensor? See the lead extension page for more info.

Duo-Twist™ cryogenic wire — WDT-32, WDT-36

  • Phosphor bronze wire
  • Non-ferromagnetic
  • Single twisted pair (2 wires)
  • Color coded (cathode-green, anode-clear)
  • Minimizes pickup noise
  • 32 and 36 AWG
  • Polyimide insulation

duo twistDuo-Twist™ is a single twisted pair (2 leads) of 32 or 36 AWG phosphor bronze wire twisted at 3.15 twists per centimeter (8 twists per inch). This wire is a good choice when any possibility of pickup noise to a diode sensor or sample by induced currents through the leads needs to be minimized.

ORDER DUO-TWIST™ WIRE NOW

Want to add wire to your sensor? See the lead extension page for more info.

Quad-Lead™ cryogenic wire — WQL-32, WQL-36

  • Phosphor bronze wire
  • Non-ferromagnetic
  • Four color coded leads
  • 32 and 36 AWG
  • Polyimide insulation

quad leadQuad-Lead™ wire is a 4-wire “ribbon cable”, which makes heat sinking and dressing leads much easier than working with individual wires. Noninductive (bifilar) windings are simple to make for heat sinks and heaters using the Quad-Lead™ wire. In addition, the wire is color coded for easy lead identification, and can be split to yield 2 wire pairs. Quad-Lead™ wire is also useful in standard 4-lead measurements in magnetic field applications due to its low magnetoresistance.

ORDER QUAD-LEAD™ WIRE NOW

Want to add wire to your sensor? See the lead extension page for more info.

Note: Quad-Lead™ wires are formed into a “ribbon cable” using Bond Coat 999 bonding film. This bonding agent will soften above 160 to 180 °C. Individual wires can be separated either by heat or with a rotary-abrasion style mechanical stripper (recommended: Eraser company RT2S Magnet Wire Stripper).

Do not separate the wires using any kind of sharp blade, as damage will result.

Download Separation of Quad-Lead™ Wires for more information.

Quad-Twist™ cryogenic wire — WQT-32, WQT-36

  • Phosphor bronze wire
  • Non-ferromagnetic
  • 2 twisted pairs (4 wires), color coded
  • Minimizes pickup noise
  • Polyimide insulation (WQT-32)
  • Formvar® insulation (WQT-36)

quad twistQuad-Twist™ is 2 twisted pairs (4 leads) of 32 or 36 AWG phosphor bronze wire. Each pair incorporates 3.15 twists per centimeter (8 twists per inch), and the 2 pairs are entwined at 1.57 twists per centimeter (4 twists per inch). This wire is a good choice when pickup noise to a diode sensor or sample by induced currents through the leads needs to be minimized. Use one twisted pair for sensor excitation and the other twisted pair for sensor output voltage to minimize pickup of electromagnetic noise.

ORDER QUAD-TWIST™ WIRE NOW

Want to add wire to your sensor? See the lead extension page for more info.

Manganin wire — WMW-30 , WMW-32, WMW-36

  • Nominal 83% copper, 13% manganese, and 4% nickel
  • Non-ferromagnetic
  • 30, 32, and 36 AWG
  • Heavy Formvar® insulation

manganinLake Shore manganin wire is often used for cryostat wiring or heater requirements in nonmagnetic applications.

ORDER MANGANIN WIRE NOW

Want to add wire to your sensor? See the lead extension page for more info.

Heavy duty lead wire — WHD-30

  • 30 AWG
  • Seven 38 AWG silver-plated twisted copper strands
  • Black etched Teflon® for adhesion to epoxy

heavy dutyThis more rugged wire is useful as a lead wire to resistance heaters in cryogenic environments where low resistance to the heater is required or desired.

ORDER HEAVY DUTY WIRE NOW

Want to add wire to your sensor? See the lead extension page for more info.

Nichrome heater wire — WNC-32

  • Nominal 80% nickel, 20% chromium
  • Non-ferromagnetic
  • 32 AWG
  • Polyimide insulation

nichromeThis high resistance wire is typically used for heater requirements. The relatively large wire size provides sufficient surface area to dissipate the heat generated within the wire with only a moderate rise in wire temperature.

ORDER NICHROME HEATER WIRE NOW

Want to add wire to your sensor? See the lead extension page for more info.

Note: We have had poor experience with heaters made using wire smaller than 32 AWG and supplying 25 W or more power. A possible alternative is one of the Lake Shore cartridge heaters.