|
| |
|
Features of Model TTPX Probe Station |
|
- High stability operation from 3.2 K to 475 K
- Ø5 mm (0.2 in) optical access through the sample stage for backside illumination of the sample
- Measurements from DC to 67 GHz
- Accommodates up to 51 mm (2 in) diameter wafers
- Configurable with up to six thermally anchored micro-manipulated probe arms
- Probe arms with 3-axis adjustments and ±5° theta planarization
- Cables, shields, and guards minimize electrical noise and thermal radiation losses
- Tabletop design with small footprint
- Options and accessories for customization to specific research needs
|
|
|
|
 |
|
Description |
| |
The Model TTPX is a versatile cryogenic micromanipulated probe station used for non-destructive testing of devices on full and partial wafers up to 51 mm (2 in) in diameter. The TTPX is a platform for measurement of electrical, electro-optical, parametric, high Z, DC, RF, and microwave properties of materials and test devices. Nanoscale electronics, quantum wires and dots, and semiconductors are typical materials measured in a TTPX. A wide selection of probes, cables, sample holders, and options makes it possible to configure the TTPX to meet your specific measurement applications.
|
| |
The TTPX operates over a temperature range of 4.2 K to 475 K. With options, the base temperature can be extended down to 3.2 K. The probe station provides efficient temperature operation and control with a continuous refrigeration system using either liquid helium or liquid nitrogen. Vapor-cooled shielding optimizes efficiency and intercepts blackbody radiation before it reaches the sample. A control heater allows precise sample stage temperature control, and along with the radiation shield heater, provides the probe station with fast thermal response.
|
|
The TTPX is user configured with up to six ultra-stable micro-manipulated stages, each providing precise 3-axis control of the probe position to accurately land the probe tip on the device features. Proprietary probe tips in a variety of sizes and materials minimize thermal mass and optimize electrical contacts to the device under test (DUT). Probe tips are thermally linked to the sample stage to minimize heat transfer to the DUT. |
| |
For increased versatility, TTPX options include a 3.2 K base temperature stage, stand, vibration isolation systems, LN2 Dewar kit, higher magnification microscope, vacuum turbo pumping system, supplemental radiation shield temperature control, fiber optic probe arm modification, and optical access sample holders. |
| |
To speak with one of our experts please contact: |
Tel: (614) 891-2244 Fax: (614) 818-1600
|
|
|
 |
|
|
