 |
 |
|
|
| Model Number |
Description |
Price |
Add To Cart |
|
|
7604
|
Hall system, 4 in EM, 642 MPS, 2 sample, 10 MW limit
|
|
|
| 7604-4 |
Hall system, 4 in EM, 642 MPS, 4 sample, 10 MW limit |
|
|
7607
|
Hall system, 7 in EM, 665 MPS, 2 sample, 10 MW limit
|
|
|
| 7607-4 |
Hall system, 7 in EM, 665 MPS, 4 sample, 10 MW limit |
|
|
| 7612 |
Hall system, 12 in EM, 668 MPS, 2 sample or wafer capability, 10 MW limit *Temperature options do not operate with this system |
|
|
| 7612-4 |
Hall system, 12 in EM, 668 MPS, 4 sample or wafer capability, 10 MW limit *Temperature options do not operate with this system |
|
|
HALL-INSTALL
|
2 days on-site installation/training |
|
|
| HALL-SERVICE |
1 day on-site service
|
|
|
| 7600 Series Options |
76014
|
Closed cycle refrigerator for 7600 Series HMS, (750TC must be ordered seperately; supplemental equipment requirements are: LHe gas cylinder and regualtor, and PS-EXT70 turbomolecular vacuum pump kit providing ultimate blank-off pressure for pumping system should be less than 10-3 torr.) *Does not operate with 7612; *Requires 1 additional installation day
|
|
|
76016
|
Oven, high temperature for 7600 Series HMS, (750TC and 3464 must be ordered seperately; supplemental equipment requirements are argon or He gas cylinder with regualtor and hose barb, PS-E2M vacuum pump kit providing blankoff pressure of
5 X 10-3 torr) *Does not operate with 7612; *Requires 1 additional installation day
|
|
|
| 76020 |
AC Current Measurement Option, 2 sample configuration |
|
|
| 76020-4 |
AC Current Measurement Option, 4 sample configuration |
|
|
750TC
|
Temperature controller option with cabling and rack mount kit
|
|
|
| 3464 |
Thermocouple Input Card |
|
|
750QMSA
|
QMSA Software option (for 7600, 7700, and 9700 systems)
|
|
|
| 7600 Series Accessories |
671-202
|
Hall sample card, 60 mm square or 60 mm diameter sample
|
$21 |
|
671-205
|
Hall sample card, 50 mm, with four pressure probes
|
$412 |
|
671-209
|
Hall sample card, 2 sided, 10 mm × 14 mm square or 12 mm diameter sample
|
$22 |
|
| 750SC-3 |
Hall sample card and enclosure with four point contacts for 3 in wafer |
|
|
| 750SC-4 |
Hall sample card and enclosure with four point contacts for 4 in wafer |
|
|
| 750SC-6 |
Hall sample card and enclosure with four point contacts for 6 in wafer |
|
|
| 750EN-3 |
Hall sample enclosure for 3" wafer |
|
|
| 750EN-4 |
Hall sample enclosure for 4 " wafer |
|
|
| 750EN-6 |
Hall sample enclosure for 6 " wafer |
|
|
| 750SC-3-RK |
Hall sample card replacement kit (board, ring, and screws) for 3 in wafer |
|
|
| 750SC-4-RK |
Hall sample card replacement kit (board, ring, and screws) for 4 in wafer |
|
|
| 750SC-6-RK |
Hall sample card replacement kit (board, ring, and screws) for 6 in wafer |
|
|
760SC10-50
|
Hall sample card, 2 sided, 10 mm × 14 mm square or 12 mm diameter sample, box of 50 including 1 with inAs sample
|
$695 |
|
| 76014-Sl |
Sample insert, standard, for 76014 CCR |
|
|
| |
| 7700A Series Systems |
7704A
|
Hall system, 4 in EM, 642 MPS, Low Voltage - Wide resistance - Auto Switching - High Sensitivity
|
|
|
7707A
|
Hall system, 7 in EM, 665 MPS, Low Voltage - Wide resistance - Auto Switching - High Sensitivity
|
|
|
7712A
|
Hall system, 12 in EM, 668 MPS, < 60mm sample, Low Voltage - Wide Resistance - Auto Switching - High Sensitivity *Temperature options do not operate with this system
|
|
|
HALL-INSTALL
|
2 days on-site installation/training |
|
|
| HALL-SERVICE |
1 day on-site service
|
|
|
| 7700A Series Options |
75012-3
|
Sample holder module for 3 in wafer enclosure for 12 in electromagnet
|
|
|
| 75012-4 |
Sample holder module for 4 in wafer enclosure for 12 in electromagnet |
|
|
| 75012-6 |
Sample holder module for 6 in wafer enclosure for 12 in electromagnet |
|
|
75013
|
Sample holder module for 4 and 7 in electromagnets, room temp/77 K nitrogen pour-fill bucket
|
|
|
| 75013-12 |
Sample holder module for 12 in electromagnet, room temp/77K nitorgen pour-fill bucket |
|
|
75014A
|
Closed cycle refrigerator for 7700 Series HMS, (750TC must be ordered seperately; Supplemental equipment requirements are: LHe gas cylinder and regulator, and PS-EX70 turbomolecular vacuum pump kit providing ultimate blank-off pressure for pumping system should be less than 10-3 torr.) *Does not operate with 7712; *Requires 1 additional installation day
|
|
|
75016
|
Oven, high temperature for 7700 Series HMS, (750TC and 3464 must be ordered seperately; Supplemental equipment requirements are argon or He gas cylinder and regulator and hose bard, PS-E2M vacuum pump kit providing blankoff pressure of 5 X 10-3 torr) *Does not operate with 7712; *Requires 1 additional installation day
|
|
|
| 77020 |
AC Measurement option |
|
|
| 77021 |
Contact blasting option |
|
|
750TC
|
Variable temperature option kit: Temperature controller, cables, and rack mount kit
|
|
|
| 3464 |
Thermocouple input card |
|
|
750QMSA
|
QMSA Software option (for 7600, 7700A, and 9700A systems)
|
|
|
| 7700A Series Accessories |
671-201
|
Hall sample card, 10 mm X 14 mm square or 12 mm diameter
|
$19 |
|
671-202
|
Hall sample card, 60 mm square or 60 mm diameter sample
|
$23 |
|
671-204
|
Hall sample card, 0.75 in , in plane operation
|
$309 |
|
671-205
|
Hall sample card, 50 mm, with four pressure probes
|
$412 |
|
| 750SC-3 |
Hall sample card and enclosure with four point contacts for 3 in wafer |
|
|
| 750SC-4 |
Hall sample card and enclosure with four point contacts for 4 in wafer |
|
|
| 750SC-6 |
Hall sample card and enclosure with four point contacts for 6 in wafer |
|
|
| 750EN-3 |
Hall sample enclosure for 3" wafer |
|
|
| 750EN-4 |
Hall sample enclosure for 4 " wafer |
|
|
| 750EN-6 |
Hall sample enclosure for 6 " wafer |
|
|
| 750SC-3-RK |
Hall sample card replacement kit (board, ring, and screws) for 3 in wafer |
|
|
| 750SC-4-RK |
Hall sample card replacement kit (board, ring, and screws) for 4 in wafer |
|
|
| 750SC-6-RK |
Hall sample card replacement kit (board, ring, and screws) for 6 in wafer |
|
|
750SC10-10
|
Hall sample card, 10 mm × 14 mm square or 12 mm diameter sample, pack of 10
|
$155 |
|
750SC10-50
|
Hall sample card, 10 mm × 14 mm square or 12 mm diameter sample, pack of 50
|
$695 |
|
750SC50-10
|
Hall sample card, 60 mm square or 60 mm diameter sample, box of 10
|
$182 |
|
671-211
|
Spare sample probe for 75014A CCR sample module
|
|
|
671-250
|
Box for 25 x 25 mm sample cards (for 10 mm samples)
|
$41 |
|
671-260
|
Wire for sample contacts, box
|
$52 |
|
673-200
|
Connector plug for hall sample module and sample card
|
$80 |
|
| |
| 9700A Series Systems |
9709A
|
Hall system, 9 Tesla magnet, Low Voltage - Wide Resistance - Auto Switching - High Sensitivity (Supplemental equipment requirements are LHe dewar and cryogens, LHe gas cylinder and regulator, and 700TLF LHE transfer line and connecting devices. LN2 dewar and cryogens for pre-cool are optional)
|
|
|
HALL-INSTALL
|
2 days on-site installation/training |
|
|
| HALL-SERVICE |
1 day on-site service
|
|
|
| 7700A/9700A Series Upgrades |
| 775ARW |
Upgrade 7500, 9500, and previous generation 7700 and 9700 series HMS to high voltage and auto-switching. Includes Lake Shore 775 Matrix upgrade kit (775 Matrix, related accessories, and IEEE-488 cable) and related cabling. Once upgraded with the 775ARW, HMS specs will match the current 7700A/9700A specifications. This upgrade is required to add AC current and contact blasting capabilities to the mentioned previous generation HMS. |
|
|
|
|
9500-Sl
|
Sample insert for 9700 Cryo system
|
|
|
| 77020 |
AC Measurement option |
|
|
| 77021 |
Contact blasting option |
|
|
750QMSA
|
QMSA Software option (for 7600, 7700, and 9700 systems)
|
|
|
| Magnetic Accessories |
| 4031 |
Hall probe holder |
$100 |
|
| 4060 |
Zero gauss chamber |
$106 |
|
| 4030-12 |
Hall probe stand, 12 in post |
$206 |
|
| 4030-24 |
Hall probe stand, 24 in post |
$224 |
|
| MCBL-6 |
Cable/software for Hall generator, used with 420/450/460, 6 ft cable with connectors |
$171 |
|
700TLF
|
LHe flexible transfer line
|
$1,700 |
|
| 770905 |
Computer, Dell with Windows 2000, monitor and IEEE controller card |
|
|
| 730906 |
Printer, must specify voltage |
|
|
| HMS SOFTWARE |
Software, HMS application, Windows enviornment |
|
|
| MCBL-6 |
Cable/software for Hall generator, used with 420/450/460, 6 ft cable with connectors |
|
|
|
|
|
|
| MRT-062-5K |
Transverse reference magnet: 0.062 gap, 5 kG, 0.5% |
$1,028 |
|
| MRT-062-10K |
Transverse reference magnet: 0.062 gap, 10 kG, 5% |
$2,056 |
|
| MRT-062-200 |
Transverse reference magnet: 0.062 gap, 200 G, 1% |
$1,028 |
|
| MRT-062-500 |
Transverse reference magnet: 0.062 gap, 500 G, 1% |
$1,028 |
|
| MRT-062-1K |
Transverse reference magnet: 0.062 gap, 1 kG, 0.5% |
$1,028 |
|
| MRT-062-2K |
Transverse reference magnet: 0.062 gap, 2 kG, 0.5% |
$1,028 |
|
| MRT-343-50 |
Transverse reference magnet: 0.343 gap, 50 G, 1% |
$1,656 |
|
| MRT-343-100 |
Transverse reference magnet: 0.343 gap, 100 G, 1% |
$1,656 |
|
| |
|
|
|
| PS-EXT70-100 |
Turbomolecular vacuum pump station with gauge, NW-25 to -16 reducer, NW-40 to -25 reducer, NW-40 clamp, and NW-25 hose. 100 VAC |
|
|
| PS-EXT70-110120 |
Turbomolecular vacuum pump station with gauge, NW-25 to -16 reducer, NW-40 to -25 reducer, NW-40 clamp, and NW-25 hose. 110 to 120 VAC |
|
|
| PS-EXT70-220240 |
Turbomolecular vacuum pump station with gauge, NW-25 to -16 reducer, NW-40 to -25 reducer, NW-40 clamp, and NW-25 hose. 220 to 240 VAC |
|
|
| PS-E2M-110120 |
Two stage rotary vacuum pump with mist filter. 100 to 120 VAC |
|
|
| PS-E2M-220240 |
Two stage rotary vacuum pump with mist filter. 2200 to 240 VAC |
|
|
| 7400-LN2-50 |
50 liter LN2 dewar with 1/2 inch top withdraw port and 10 psi pressure relief valve |
|
|
| 1230-60 |
60 liter LHe dewar |
|
|
| |
|
|
|
| RC-EM4-200230-60-CE |
Recirculating chiller, 662 & EM4; PD-2, 200-230 V/60 Hz/12 A, 2410 W, 3.7 gpm, 35 psi |
|
|
| RC-EM4-200-50-CE |
Recirculating chiller, 662 & EM4; PD-2, 200 V/50 Hz/12 A, 2180 W, 3.1 gpm, 35 psi |
|
|
| RC-EM4-230-50-CE |
Recirculating chiller, 662 & EM4; PD-2, 220V-240 V/50 Hz/10 A, 2180 W, 3.1 gpm, 35 psi |
|
|
| RC-EM7-200230-60-CE |
Recirculating chiller, 665 & EM7; CP-55, 200-230 V/60 Hz/20 A, 5045 W, 6 gpm, 40 psi |
|
|
| RC-EM7-400-50-CE |
Recirculating chiller, 665 & EM7; PD-2, 380 V-400 V/50 Hz/3 ph/7 A, 4540 W, 3.2 gpm, 30 psi |
|
|
| RC-EM7-200-50-CE |
Recirculating chiller, 665 & EM7; PD-2, 200 V/50 Hz/20 A, 4540 W, 3.2 gpm, 30 psi |
|
|
| RC-EM10-208230-60-CE |
Recirculating chiller, 668 & EM10, 12; CP-75 R-22, 208-230 V/60 Hz/3 ph/38 A, 15700 W, 23 gpm, 40 psi |
|
|
| RC-EM10-380400-50-CE |
Recirculating chiller, 668 & EM10, 12; CP-75 R-22, 380-400 V/50 Hz/3 ph/17 A, 13030 W, 10 gpm, 40 psi |
|
|
| SWP-SYSTEM |
Supplemental water pressure pump for magnet power supply and electromagnet |
|
|
 |
|
|
|
