Sign In

U.S. And Canada Only Shipping

At this time, we cannot ship or bill web orders outside of the United States and Canada. We cannot accept cards issued from a bank outside of the U.S. or Canada. If you are outside of the U.S. or Canada, or if you are exporting product(s) outside of the U.S. or Canada and would like export prices or order information, please contact your local sales representative by visiting the Sales Representatives page.

Lead Time: Lake Shore delivers most products from stock and they are shipped within one week (5 business days). If products are not in stock, the typical lead times are as follows. Large quantity orders can affect lead time. Please call (614-891-2244) or e-mail for the most up to date lead time.

Sales Tax: Lake Shore currently collects sales tax in the following states: AZ, CA, FL, IL, IN, MI, OH, SC, WA

Terms & Conditions Warranty Statement Shipping Charges
Lead Time 1 week 2 weeks 3 weeks 4 weeks 6 weeks 8 weeks Consult
Lead times are dependent upon backlog at time of order. Please consult Lake Shore if you require a definitive lead time.

​Please note: The DT-470, DT-414 and DT-421 silicon diodes have been discontinued. There is still some remaining stock of certain models, shown on the Discontinued and Discounted Equipment page. Our recommended replacements are the DT-670 silicon diodes.

Ordering

Uncalibrated cryogenic temperature sensor

Step 1: Choose diode series, for example DT-470.
Step 2: Choose package or mounting adapter – if ordering adapter, substitute the adapter suffix for the SD suffix, for example DT-470-CU
Step 3: Choose tolerance band (if applicable), for example DT-470-CU-11.



Calibrated cryogenic temperature sensor

Step 1: Choose diode series, for example DT-470.
Step 2: Choose package or mounting adapter – if ordering adapter, substitute the adapter suffix for the SD suffix, for example DT-470-CU-13
Step 3: Specify the calibration range suffix code after the model number and package suffix, for example DT-470-CU-13-1.4L
Note: When ordering a DT-470, only Band 13 sensors are calibrated.

DT-471 Calibration Range Suffix Codes
Numeric figure is the low end of the calibration.
Letters represent the high end: S=SoftCal™, L=325 K, H=500 K
Model NumberUncal2S10L10H70L70H
Calibration Price $147 $361 $473 $279 $412
DT-471-BO$184$331$545$463
DT-471-CO$157$304$518$630$436$569
DT-471-CU$196$343$557$475
DT-471-CU-HT$250$397$611$723$529$662
DT-471-CY$210$357$571$489
DT-471-DI*$196
DT-471-ET$157$304$518$436
DT-471-LR$157$304$518$436
DT-471-MT$157$304$518$436
DT-471-SD$124$271$485$597$403$536


*Lake Shore does not warrant mechanical damage to the DT-414

DT-414 handling: fragile assembly—must not be turned over on gold wire bond side—handle by edges of substrate or by 50 µm diameter gold leads; unencapsulated device must not be exposed to moisture or corrosive atmosphere

DT-414M-UN substrate is backside metallized

Note: upper temperature limit package dependent—see Sensor Packages section
Other packaging available by special order—please consult Lake Shore

Accessories available for cryogenic temperature sensors
SN-CO-C1 CO style sensor clamps for SD package $41
ECRIT Expanded interpolation table $101
8000 Calibration report on CD-ROM $95
COC-SEN Certificate of conformance $34

For information on mounting adapters available for use with SD package, click here.

To add length to sensor leads (SMOD), click here.

Accessories suggested for installation—
see Accessories section for full description
Stycast® epoxy
Apiezon® grease
90% Pb, 10% Sn solder
Indium solder
VGE-7031 varnish
Phosphor bronze wire
Manganin wire
Detailed description of:
Installation
Uncalibrated cryogenic temperature sensors
SoftCal™
Calibrated cryogenic temperature sensors
CalCurve™
Cryogenic temperature sensor packages